643H (Shown with Continuous Saw)

T127000
Item Measurement Specification

1-Maximum Height at Saw Head Attaching Pin

Height 2451 mm (96.5 in.)

2-Saw Head Tilt Back at Ground Level

Angle 24°

3-Saw Head Tilt Forward at Ground Level

Angle 60°

4-Ground-to-Saw Head Attaching Pin

Height 743 mm (29.3 in.)

5-Front Axle-to-20 in. Tree Centerline

Distance 2096 mm (82.5 in.)

6-Saw Head Attaching Pin-to-Front Axle

Distance 993 mm (39.1 in.)

7-Machine Articulation-to-Front Axle

Distance 1194 mm (47 in.)

8-Wheel Base

Distance 2642 mm (104 in.)

CED,OUOEBTW,482 -19-28MAR00-1/2

Item Measurement Specification

9-Overall Length

Length 7290 mm (287 in.)

10-Rear Axle-to-Rear of Machine

Distance 2078 mm (81.8 in.)

11-Ground Clearance

Height 508 mm (20 in.)

12-Ground-to-Axle Centerline

Height 742 mm (29.2 in.)

13-Overall Height

Height 3251 mm (128 in.)

Feller-Buncher Width with 28L-26 LS2 Tires

Width 2048 mm (120 in.)

Weight with Factory Installed (Cameco) Shear

Weight 14 504 kg (31,975 lb)

Weight with Factory Installed (Cameco) Saw

Weight 14 504 kg (31,975 lb)

NOTE: Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with ICED and SAE standards. Except where otherwise

noted, specifications are based on a machine equipped with 28L-26, LS2 tires, full fuel tank, 80 kg (175 lb) operator and standard equipment.

CED,OUOEBTW,482 -19-28MAR00-2/2