Keep ROPS Installed Properly
The protection offered by ROPS will be impaired if ROPS is subjected to structural damage, is involved in an overturn incident, or is in any way altered by welding, bending, drilling, or cutting. A damaged ROPS should be replaced, not reused. |
CAUTION:
Make certain all parts are reinstalled correctly if the roll-over protective structure (ROPS) is loosened or removed for any reason. Tighten mounting bolts to proper torque.
| Item | Measurement | Specification |
|---|---|---|
|
Right Side Cab Pivot Cap Screw |
Torque | 285 Nm (210 lb-ft) |
|
Left Side Cab Pin Retaining Cap Screw |
Torque | 68 Nm (50 lb-ft) |
CED,OUOELLF,23 -19-29MAR00-1/1 |