Operate Machine Safely

Always operate the machine with the operator protective structure (OPS) in place (doors, screens, windows, etc.).

Always walk around the machine before starting and moving it. Keep bystanders clear of machine, especially before moving boom, swinging upperstructure, or traveling. Always be alert for bystanders in or near the work area.

Avoid contact between boom and overhead obstacles when you operate, move, or haul machine.

When working on a slippery slope, position the tracks in the up or down slope direction of travel. Then the track shoe grousers help serve as a brake.

CED,OUOE049,2 -19-22MAY00-1/2

Make sure work site footing is strong enough to firmly support the machine. When working next to a ledge, position the machine with the tracks in the direction of travel toward or away from the ledge, and with the propel motors (1) at the rear, away from the ledge.

If engine stops during operation on a hillside, start engine immediately. Turn pilot control pressure switch to OFF then to ON, and resume normal operation.

1-Propel Motor (2 used)

CED,OUOE049,2 -19-22MAY00-2/2