Inspect Fan Belt

1. Check belt regularly for wear, especially for cracks at the bottom of grooves and for frayed edges.

2. If necessary, replace belt.

3. Install a 15 mm wrench to the TOP pulley (B) of belt tension adjuster. Turn wrench counterclockwise to pull tension adjuster pulley away from belt (A), releasing belt tension.

4. Hold tension adjuster away from belt while removing old belt and installing new belt.

5. Slowly release wrench tension to allow tension adjuster to move clockwise against new belt. Tension is automatically adjusted.

6. Remove wrench.

T119350


A-Belt
B-Top Pulley

CED,OUOE049,55 -19-24MAY00-1/1