|
New engines are filled at the factory with John Deere ENGINE BREAK-IN OIL. During the break-in period, add John Deere ENGINE BREAK-IN OIL as needed to maintain the specified oil level.
Change the oil and filter after the first 100 hours of operation of a new or rebuilt engine.
After engine overhaul, fill the engine with John Deere ENGINE BREAK-IN OIL.
If John Deere ENGINE BREAK-IN OIL is not available, use a diesel engine oil meeting one of the following during the first 100 hours of operation:
-
API Service Classification CE
-
API Service Classification CD
-
API Service Classification CC
-
ACEA Oil Sequence E2
-
ACEA Oil Sequence E1
|
After the break-in period, use John Deere PLUS-50
™
or other diesel engine oil as recommended in this manual.
IMPORTANT:
Do not use PLUS-50 oil or engine oils meeting any of the following during the first 100 hours of operation of a new or rebuilt engine:
| |
API CJ-4 |
ACEA E7 |
| |
API CI-4 PLUS |
ACEA E6 |
| |
API CI-4 |
ACEA E5 |
| |
API CH-4 |
ACEA E4 |
| |
API CG-4 |
ACEA E3 |
| |
API CF-4 |
|
| |
API CF-2 |
|
| |
API CF |
|
These oils will not allow the engine to break-in properly.
|