Remove and Install Halogen Bulb

1. Remove screws (A), cover (B), lamp (C), and lamp housing (E).

2. Disconnect wiring lead and release retainer clip to remove bulb (D).

IMPORTANT: Do not touch the halogen bulb with bare hands. Oil and moisture may cause premature bulb failure. Clean bulb glass if touched, using an oil-free cloth with alcohol.

3. Install new bulb, lamp and assemble housing.

T7484AC


A-Screw (4 used)
B-Lamp Cover
C-Lamp
D-Bulb
E-Lamp Housing

OUO1030,000072C -19-05NOV03-1/1