Starting Fluid-Cold Weather Start Aid (S.N. -882699)
IMPORTANT: Remove can from container and install container upside down to protect starting aid components from dust. IMPORTANT: Prevent damage to engine. Use starting aid when temperatures are below 0°C (32°F) and only when engine is COLD. NOTE: If equipped with a high pressure KBI® cold weather starting system, press and hold starting aid fluid button (A) to start engine. USING START AID IMPORTANT: To avoid engine damage, push starting aid button only when engine is cold and cranking. Starting aid fluid is being injected into engine as long as you push and release button (A). NOTE: Crank engine for 30 seconds maximum, allowing two minutes between cranking periods. While cranking engine, push starting aid button (A). REPLACING START AID CONTAINER 1. Turn container counterclockwise to remove.2. Remove can (B) from container. 3. Remove safety cap and spray button from new can and install into container. 4. Install container clockwise into base. |
|
CAUTION:
Prevent possible injury from exploding container. Starting fluid is highly flammable. Keep container away from heat, sparks, and open flame. Contents are pressurized. Do not puncture or incinerate container. Remove can from machine if engine does not need starting fluid.
OUO1030,0000749 -19-05JAN04-1/1 |