Inspect Machine Daily Before Starting

Perform periodic service checks in the Maintenance-Every 10 Hours or Daily. (Section 3-4.)

  • Check precleaner (A).
  • Check hydraulic oil level (B).
  • Clean operator's station (C).
  • Check pedals and controls for freedom of movement (D).
  • Check inflation pressure of tires (E) and hardware torque of wheels.
  • Clean radiator fins (F).
  • Check and lubricate hitch pivot points (G).

ELECTRICAL SYSTEM: Check for worn or frayed wires and loose or corroded connections.

HYDRAULIC SYSTEM: Check for leaks, missing or loose clamps, kinked hoses, and lines or hoses in areas that rub against each other or other parts.

LOADER: Check for loose, bent, broken or missing parts and hardware.

LUBRICATION: Check lubrication points shown on Periodic Maintenance Chart or in Maintenance-Every 10 Hours or Daily. (Section 3-4).

PROTECTIVE DEVICES: Check ROPS, guards, shields, covers, and seat belt.

FIRE PREVENTION: Clean machine of debris.

PARK BRAKE: Check for correct operation.

SAFETY: Walk around machine to be sure all persons are clear from machine area.

T104973


A-Precleaner
B-Hydraulic Oil Level
C-Operators Station
D-Pedals and Controls
E-Tire Pressure
F-Radiator Fins
G-Hitch Pivot Points

TX,20,BG441 -19-28FEB07-1/1