Parking the Machine

2. Lower front loader to ground.

3. Manual Shift Transmission: Move transmission control lever (TCL) (B) and gearshift lever (A) to N.

Power Shift Transmission: Move TCL (B) to N.

4. Engage park brake with switch (C).

IMPORTANT: To avoid damage to engine, operate engine slow idle with no load for 2 minutes before shutting down.

5. Operate engine at slow idle with no load and idle for 2 minutes.

NOTE: STOP indicator and park brake indicator will stay on until engine has completely stopped.

6. Turn key to OFF position and remove from switch.

7. Release hydraulic pressure by moving control lever until equipment does not move.

A-Gear Shift Lever
B-Transmission Control Lever (TCL)
C-Park Brake Switch
D-Engine Speed Control Knob-If Equipped

TX,30,BG450 -19-02MAR07-1/1