Operating Loader

causym CAUTION: Prevent possible injury from unexpected machine movement. Operate loader facing forward in the operator's seat only.

NOTE: Control lever will return to neutral if released during normal loader operation.

Push lever in following directions for corresponding loader movements:

NOTE: Moving lever completely forward (A) will place loader in float position. Lever will stay in float position until it is manually moved.

  • A-Lever Forward: Lower Boom
  • B-Lever Rearward: Raise Boom

NOTE: Moving lever completely to the left (roll back) will hold it in position until bucket is level. Once bucket is level, lever will return to neutral.

  • C-Lever Left: Roll Back Bucket
  • D-Lever Right: Dump Bucket

For faster cycle times, fully extend lever in desired direction, run engine at fast idle and move boom and bucket at same time.

  • E-Lever Rearward: Third Function (Open)
  • F-Lever Forward: Third Function (Closed)
T122072C

(S.N. -882699) Shown

T105012


A-Lower Boom
B-Raise Boom
C-Roll Back Bucket
D-Dump Bucket
E-Third Function Control (Open)-If Equipped
F-Third Function Control (Closed)-If Equipped

TX,35,BG451 -19-29OCT03-1/1