Loader Boom Service Lock

Use front boom lock channel when front loader must be raised for service procedures. To lock front boom in up position:

2. Raise boom until lock channel (2) can fit over cylinder rod.

3. Stop engine and lower channel over cylinder rod.

4. Lower boom until it is stopped by lock channel.

5. Place pin (1) and cotter pin in mounting hole to retain channel in locked position.

To return front boom to storage position:

2. Remove pin and cotter pin from lock.

3. Lift lock channel (2) up so tab is positioned through hole in boom arm.

4. Retain in storage position with pin (1) and cotter pin.

1-Locking Pin
2-Channel

TX,50,BG482 -19-17MAR08-1/1