Check Park Brake (S.N. -888003)

causym CAUTION: Prevent possible injury from unexpected machine movement. Fasten seat belt before performing this check.

1. Fasten seat belt.

2. Start machine on dry, hard pavement.

3. Raise loader bucket and rear mounted equipment (if equipped) off ground.

4. Move the park brake switch (A) to the OFF position.

5. Disengage MFWD, if equipped.

6. Move the transmission control lever (TCL) to forward F position and the gear shifter to 2nd gear.

7. Depress the speed control pedal to the floor and drive approximately 7 m (20 ft) before moving the park brake switch to ON position. The machine must stop within 2 m (6 ft) and transmission must shift to neutral N.

Specification

Park Brake Stopping -Distance 2 m  6 ft

8. If necessary, check adjustment of park brake cap screws. See Towing. (Section 2-2.)

T106339


A-Park Brake Switch

TX,55,BG489 -19-02MAR07-1/1