Check Hydraulic Oil Level

NOTE: Check hydraulic oil level when oil is cool, with machine parked on a level surface. Check before starting engine with loader bucket lowered to ground.

1. Check oil level in sight gauge (A).

2. If oil is below sight gauge, remove filler cap (B) and add oil. See Transmission, Hydraulic, Axles, and Mechanical Front Wheel Drive Oil. (Section 3-1.)

3. Install filler cap.

T105189


A-Hydraulic Oil Level Sight Gauge
B-Hydraulic Oil Filler Cap

TX,75,BG499 -19-02MAR07-1/1