Check Transmission Oil Level (S.N. -888003)

CAUTION: Prevent possible injury from unexpected machine movement. Never rely on transmission control lever (TCL) alone to keep machine from moving. Machine can unexpectedly roll or move under power, resulting in death or serious injury. Always engage park brake to hold machine.

2. Engage park brake.

3. Move gear shifter and TCL to neutral.

4. Start engine and run at slow idle for 3 minutes to warm transmission oil.

5. With engine running at slow idle, turn dipstick handle (A) counterclockwise and remove.

NOTE: Normal hot oil can be above full mark.

6. Check oil level on dipstick. If oil is not within operating range, add oil. See Transmission, Hydraulic, Axles, and Mechanical Front Wheel Drive Oil. (Section 3-1.)

7. Install dipstick and turn clockwise to tighten.

A-Transmission Oil Dipstick

VD76477,00013F1 -19-02MAR07-1/1