Engine and Hydraulic Oil (S.N. 881402-)

Use oil viscosity based on the expected air temperature range during the period between oil changes.

Oils meeting one of the following specifications are also recommended:

• ACEA Oil Sequence E7
• ACEA Oil Sequence E6
• ACEA Oil Sequence E5
• ACEA Oil Sequence E4

Extended service intervals may apply when John Deere PLUS-50, ACEA E7, ACEA E6, ACEA E5, or ACEA E4 engine oils are used. Consult your John Deere dealer for more information.

Other oils may be used if they meet one or more of the following:

• John Deere TORQ-GARD SUPREME ™
• API Service Category CJ-4
• API Service Category CI-4 PLUS
• API Service Category CI-4
• API Service Category CH-4
• API Service Category CG-4
• API Service Category CF-4
• ACEA Oil Sequence E3
• ACEA Oil Sequence E2

If oils meeting API CG-4, API CF-4, or ACEA E2 are used, reduce the service interval by 50%.

Multi-viscosity diesel engine oils are preferred.

Diesel fuel quality and fuel sulfur content must comply with all existing emissions regulations for the area in which the engine operates.

If diesel fuel with sulfur content greater than 0.50% (5000 ppm) is used, reduce the service interval by 50%.

PLUS-50 is a trademark of Deere & Company
TORQ-GARD SUPREME is a trademark of Deere & Company

VD76477,000141B -19-14FEB07-1/2

DO NOT use diesel fuel with sulfur content greater than 1.00% (10 000 ppm).

VD76477,000141B -19-14FEB07-2/2