|
Machine Will Not Move in Forward or Reverse
|
Low oil level in transmission
|
Add oil to correct level.
|
|
|
Broken drive shafts.
|
Inspect drive shafts and universal joints for external damage. See your authorized dealer.
|
|
Transmission Slippage
|
Low oil level
|
Add oil.
|
|
|
Wrong oil grade
|
Change oil.
|
|
Machine Lacks Power or Moves Slow
|
Oil level is low
|
Add oil to correct level.
|
|
|
Wrong oil, aerated oil
|
Change oil.
|
|
|
Brake dragging
|
Check for excessive heat in brake area of axle housing after operating machine. See your authorized dealer.
|
|
Transmission Shifts Too Slow
|
Low or high oil level (aeration of oil)
|
Add oil or drain.
|
|
|
Wrong oil
|
Change oil.
|
|
Transmission Overheats
|
Oil level too high or too low
|
Check oil level and correct.
|
|
|
Incorrect type of oil
|
Drain and replace oil.
|
|
|
Oil cooler air flow restricted
|
Inspect and clean exterior of cooler. See your authorized dealer.
|
|
|
Transmission or coolant oil leak
|
See your authorized dealer.
|
|
|
Fan or shroud damaged
|
See your authorized dealer.
|
|
Excessive Gear Clash when Shifting
|
Attempt to shift too fast
|
See Driving the Machine. (Section 2-2.)
|
|
|
Shifting without using neutral disconnect
|
Depress neutral disconnect when shifting.
|
|
Excessive Power Train Noise
|
Engine low idle too slow
|
See your authorized dealer.
|
|
|
Oil level low
|
Fill to correct oil level.
|