Change Hydraulic Reservoir Oil, Filter, PTO Oil and Filter-If Equipped (S.N. 888004-)

1. Park machine on a level surface.

2. Lower loader bucket to ground and stop engine.

3. Remove reservoir filler tube cap.

NOTE: Dispose of waste oil properly.

4. Remove drain plug (A) from bottom of reservoir tank and drain oil.

5. Replace plug.

6. Replace hydraulic oil filter and PTO filter (if equipped). See Replace Hydraulic Oil Filter and PTO Filter-If Equipped (S.N. 888004-). (Section 3-10.)

7. Refill hydraulic reservoir. See Transmission, Hydraulic, Axles, and Mechanical Front Wheel Drive Oil. (Section 3-1.)

Specification

Hydraulic Reservoir -Capacity 45.5 L 12 gal
PTO Gearbox (if equipped) -Capacity 1.86 L 1.96 qt

8. Check oil level.

T106436


A-Hydraulic Reservoir Drain Plug

VD76477,0001469 -19-29MAR07-1/1