Check Rear Axle Oil Level (S.N. 888004-)

NOTE: If the backhoe has been run in high-speed transport, wait 30 minutes for the axle oil level to stabilize before checking oil.

1. Move machine onto level ground.

2. Remove rear axle oil level plug (1). Oil should run out of plug hole if the oil level is correct.

3. If oil level is not correct, add oil as necessary. See Transmission, Axles, and Mechanical Front Wheel Drive Oil. (Section 3-1.)

4. Install plug.

TX1021377A


1-Rear Axle Oil Level Plug

VD76477,00014F1 -19-12APR07-1/1