250D Articulated Dump Truck Specifications

T147691-UN-13NOV01

1 - Height, Machine Overall—Dumped

2 - Height, Top of Dump Body Side—Lowered

3 - Height, Dump Body Lip—Lowered

4 - Height, Dump Body Lip—Dumped

5 - Clearance, Articulation Pivot-to-Ground

6 - Height, Machine Overall—Lowered

7 - Angle, Maximum Dump Body

8 - Angle, Maximum Approach

9 - Angle, Maximum Articulation

10 - Length, Dump Body Overall

11 - Length, Maximum Dump Body Load

12 - Protrusion, Dump Body Rear Edge

13 - Length, Dump Body Lip-to-Rear Axle Centerline—Lowered

14 - Length, Rear Axle Centerline-to-Middle Axle Centerline

15 - Length, Middle Axle Centerline-to-Front Axle Centerline—Articulation Frames Straightened

16 - Length, Articulation Pivot-to-Front Axle Centerline

17 - Length, Front Axle Centerline-to-Front of Machine

18 - Length, Machine Overall—Lowered, Articulation Frames Straightened

19 - Width, Dump Body Overall

20 - Clearance, Minimum Tire-to-Tire

21 - Width, Tire Tread Centerline-to-Tire Tread Centerline

22 - Width, Tires Overall

23 - Radius, Inside Turning

24 - Radius, Outside Turning

NOTE: Specifications and design subject to change without notice. Whenever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, specifications are based on a machine equipped with all standard equipment, 79 kg (175 lb) operator, and full fuel tank.

Item	Measurement	Specification
250D Articulated Dump Truck Dimensions
1—Machine Overall—Dumped	Height	6128 mm (20 ft 1 in.)
2—Top of Dump Body Side—Lowered	Height	2629 mm (8 ft 7 in.)
3—Dump Body Lip—Lowered	Height	1897 mm (6 ft 3 in.)
4—Dump Body Lip—Dumped	Height	588 mm (1 ft 1 in.)
5—Articulation Pivot-to-Ground	Clearance	447 mm (1 ft 6 in.)
6—Machine Overall—Lowered	Height	3510 mm (11 ft 6 in.)
7—Maximum Dump Body	Angle	70°
8—Maximum Approach	Angle	30°
9—Maximum Articulation	Angle	45°
10—Dump Body Overall	Length	5390 mm (17 ft 8 in.)
11—Maximum Dump Body Load	Length	5242 mm (16 ft 10 in.)
12—Dump Body Rear Edge	Protrusion	509 mm (1 ft 8 in.)
13—Dump Body Lip-to-Rear Axle Centerline—Lowered	Length	1316 mm (4 ft 4 in.)
14—Rear Axle Centerline-to-Middle Axle Centerline	Length	1670 mm (5 ft 8 in.)
15—Middle Axle Centerline-to-Front Axle Centerline—Articulation Frames Straightened	Length	4177 mm (13 ft 8 in.)
16—Articulation Pivot-to-Front Axle Centerline	Length	1363 mm (4 ft 5 in.)
17—Front Axle Centerline-to-Front of Machine	Length	2337 mm (7 ft 8 in.)
18—Machine Overall—Lowered, Articulation Frames Straightened	Length	9501 mm (31 ft 2 in.)
19—Dump Body Overall	Width	2758 mm (9 ft 1 in.)
20—Minimum Tire-to-Tire	Clearance	1570 mm (5 ft 2 in.)
21—Tire Tread Centerline-to-Tire Tread Centerline	Width	2225 mm (7 ft 4 in.)
22—Tires Overall	Width	2880 mm (9 ft 5 in.)
23—Inside Turning	Radius	4167 mm (13 ft 8 in.)
24—Outside Turning	Radius	7935 mm (26 ft)
250D Specifications
250D Articulated Dump Truck	Weight	20 400 kg (44 500 lb)
250D Dump Body—Dump	Cycle Time	11.9 seconds
250D Dump Body—Lower	Cycle Time	6 seconds