Parking the Machine

1. Unload machine and lower dump body to fully-lowered position.

2. Stop machine on firm, level ground.

3. Engage park brake.

4. Select neutral (N) on gearshift control.

5. IMPORTANT: DO NOT stop engine immediately after bringing machine to a halt. Allow engine to idle for 2 minutes before stopping engine. This allows turbocharger to cool down and receive proper lubrication, and for all oil temperatures to stabilize.

   Allow engine to idle for 2 minutes before stopping engine. This allows turbocharger to cool down and receive proper lubrication and for all oil temperatures to stabilize.

6. Move all switches to OFF position.

7. Turn key switch to OFF.

8. If machine is to be parked overnight, turn battery disconnect switch to OFF and lock cab door, fuel cap and compartments.

If storing longer than overnight, see Prepare Machine for Storage in Miscellaneous—Storage section.