Monitor Display Unit—Default Display Menu

T144175-UN-09OCT01

1 - Message Display

2 - Gear Display

3 - Drive/Neutral/Reverse Display

4 - NEXT Button

5 - Information Display

6 - Tachometer Display

7 - Hour Meter Display

1. Message Display: When key switch is turned ON or machine is started, the default menu will be displayed. The default menu can be configured to suit the operator. The information on the bottom row can be changed by pressing the NEXT button.

   When other menus are selected or service codes are detected, message display will show relevant, descriptive information.

2. Gear Display: When machine is in neutral (N), the gear display will show “0”. When machine is in drive (D), gear display will show the current of 6 forward gears that the machine is in. When machine is in reverse (R), the gear display will display “1”; there is only a single reverse gear.
3. Drive/Neutral/Reverse Display: When machine is in drive (D), display will show “F”. When machine is in neutral (N), display will show “N”. When machine is in reverse (R), display will show “R”.
4. NEXT Button: To change the information shown in the information display, press and hold NEXT button for 3 beeps to access default menu. Once default menu is accessed, push NEXT button repeatedly until message display (1) shows that desired default information is being shown in information display (5). Once default screen has been changed, the selected default information will be displayed any time the key switch is turned to the ON position or the machine is started.
5. Information Display: Information displayed varies, depending on which default display is currently selected. When ignition is switched OFF and then ON again, the last selected information will be displayed.
6. Tachometer Display: Displays current engine speed rpm.
7. Hour Meter Display: Displays the machine hours in whole hour increments. The hour meter accumulates hours only when the engine is running.

T143037-UN-11OCT01

Default Menu Function
Default Menu	Description
Machine Model	Message display shows machine model number. Data display shows machine system voltage in volts.
Bin Tip Counter	Data display shows number of times dump body was tipped since bin tip counter was last reset.
Trip Distance	Data display shows distance machine traveled, in kilometers or miles, since counter was last reset.
Trip Time	Data display shows machine operation time since counter was last reset.
Trip Fuel	Data display shows machine fuel consumption rate since trip fuel counter was last reset.
Odometer	Odometer displays total distance machine has travelled in kilometers or miles. Odometer cannot be reset.
Lockup Clutch	Data display shows ON/OFF status of lock up clutch.
Transmission Temperature	Data display shows transmission oil temperature in °C or °F.
Return Temperature	Data display shows transmission return oil temperature in °C or °F.
Retarder Torque	Data display shows transmission torque as a percentage of available torque.
Engine Temperature	Data display shows engine temperature in °C or °F.
Engine Oil Pressure	Data display shows engine oil pressure in bar or psi.
Engine Oil Level	Data display shows engine oil level as a percentage.
Fuel Consumption	Data display shows fuel consumption in L/h or gal/h.
Actual Torque	Data display shows machine torque as a percentage of available torque.
Engine Retarder Torque	Data display shows engine brake torque as a percentage of available torque.
Fuel Level	Data display shows fuel supply in L or gal.
System Air Pressure	Data display shows system air pressure in bar or psi.
Hydraulic Temperature	Data display shows hydraulic oil temperature in °C or °F.
Brake Temperature	If machine is equipped with wet brakes, data display shows wet brake temperature in °C or °F.