Check Brake Accumulators

1. Start engine and wait until main pump has fully charged the accumulators.

2. Press brake pedal repeatedly to make the main pump recharge the accumulators several times. Stop pushing pedal while in the middle of a recharge cycle, to ensure brakes are not consuming oil after main pump stops.

3. Turn key switch to OFF position to stop engine.

4. Turn key switch to ON position and wait for bulb check to complete.

5. Press brake pedal repeatedly, counting the number of strokes before the brake indicator lights. Machine must allow 8 strokes of the brake pedal before brake pressure indicator on instrument panel lights. If it does not, see your authorized dealer.