Monitor Display Unit-Menu Function

1. Message Display: Shows description of current menu screen selected.
2. Menu Display: Shows which menu is currently selected.
3. Sub Menu Display: Shows which sub menu is currently selected.
4. Sub Sub Menu Display: Shows which sub sub menu is currently selected.
5. Information Display: Information displayed varies, depending on which menu screen is currently selected.
6. MENU Button: Push to advance through 5 menus (A, B, C, D, and E) and the default menu.

Push MENU at any time while navigating through a menu to return to default data display.


7. BACK Button: Push to return to the next higher menu. For example, if navigating in the A 01 sub menu level, pressing BACK will return the MDU data display to the A menu of the top menu level.
8. NEXT Button: Push to advance from one menu to the next in the same sub menu level or sub sub menu level. For example, if navigating in the A 01 sub level, push NEXT button once to go to the A 02 menu.
9. SELECT Button: Push to access the menu below the currently shown menu. For example, if sub level menu A 01 is currently displayed, press SELECT to display the A 011 sub sub level.

T144178


1-Message Display
2-Menu Display
3-Sub Menu Display
4-Sub Sub Menu Display
5-Information Display
6-MENU Button
7-BACK Button
8-NEXT Button
9-SELECT Button

OUO1043,0000DB5 -19-21JUN01-1/13

T143038

OUO1043,0000DB5 -19-21JUN01-2/13

T143039

OUO1043,0000DB5 -19-21JUN01-3/13

T143040

OUO1043,0000DB5 -19-21JUN01-4/13

T143744

OUO1043,0000DB5 -19-21JUN01-5/13

T143041

OUO1043,0000DB5 -19-21JUN01-6/13

T143042

OUO1043,0000DB5 -19-21JUN01-7/13

Menu Functions
Menu Description
A
00		 Counters Menu displays counter information and allows counters to be reset.
  A
01		 Trip Information Menu displays trip counter information since counters were last reset.
  A
011		 Trip Distance Data display shows distance machine traveled, in kilometers or miles, since trip distance counter was last reset.
  A
0111		 Reset Press SELECT for longer than 3 beeps to reset trip distance counter.
  A
012		 Trip Time Data display shows machine operation time since trip time counter was last reset.
  A
0121		 Reset? Press SELECT for longer than 3 beeps to reset trip time counter.
  A
013		 Trip Fuel Data display shows machine fuel consumption rate since trip fuel counter was last reset.
  A
0131		 Reset? Press SELECT for longer than 3 beeps to reset trip fuel counter.
  A
014		 Reset All Trip Data? Press SELECT for longer than 3 beeps to reset all trip counters.
  A
02		 Bin Tip Counter Data display shows number of times dump body was tipped since bin tip counter was last reset.
  A
021		 Reset? Press SELECT for longer than 3 beeps to reset bin tip counter.
  A
03		 Odometer Odometer displays distance machine has traveled in kilometers or miles. Odometer cannot be reset.
B
00		 Actual Values Menu displays machine sensor information.
  B
01		 Engine Values Menu displays engine sensor information.
  B
011		 Engine Oil Pressure Data display shows engine oil pressure in bar or psi.
  B
012		 Engine Coolant Temperature Data display shows engine coolant temperature in °C or °F.
  B
013		 Throttle Position Data display shows throttle position as a percentage of full throttle.
  B
014		 Actual Torque Data display shows actual engine torque as a percentage.
  B
015		 Engine Retarder Torque Data display shows engine brake as a percentage.
  B
016		 Engine Oil Level Data display shows engine oil level as a percentage of full.
  B
017		 Fuel Consumption Data display shows fuel consumption in L/h or gal/h.
  B
02		 Transmission Values Menu displays transmission sensor information.

 

OUO1043,0000DB5 -19-21JUN01-8/13

Menu Functions
Menu Description
  B
021		 Transmission Temperature Data display shows transmission temperature in °C or °F.
  B
022		 Lock-Up Clutch Data display shows ON/OFF status of lock-up clutch.
  B
023		 Current Gear Data display shows the currently activated travel gear.
  B
024		 Retarder Torque Data display shows actual transmission retarder torque as a percentage.
  B
025		 Retarder Oil Temperature Data display shows retarder oil temperature in °C or °F.
  B
03		 Vehicle Values Menu displays miscellaneous machine sensor information.
  B
031		 Air Pressure Data display shows system air pressure in bar or psi.
  B
032		 Fuel Level Data display shows fuel supply in L or gal.
  B
033		 Bin Position Data display shows body position as a percentage of body in full up position.
  B
034		 Hydraulic Temperature Data display shows hydraulic oil temperature in °C or °F.
  B
035		 Brake Temperature If machine is equipped with wet brakes, data display shows wet brake temperature in °C or °F.
  B
036		 Inter-Axle Lock Data display shows ON/OFF status of differential lock.
C
00		 Diagnostics This menu is used to display service codes and diagnose inputs and outputs of CCU.
  C
01		 Actual Service Codes Menu displays CCU service code. If service code appears, see Service Codes in Miscellaneous-Troubleshooting section.
  C
011		 Service Code 1 Data display shows first active service code. See Service Codes in Miscellaneous-Troubleshooting section.
  C
012		 Service Code 2 Data display shows second active service code. See Service Codes in Miscellaneous-Troubleshooting section.
  C
01X		 Service Code X Continue to press NEXT button to advance through all active service codes.
  C
01Y		 End Continue to press NEXT button until END is displayed on message display. Press NEXT button again to return to first active service code.
  C
02		 Stored Service Codes Menu displays CCU service code. If service code appears, see Service Codes in Miscellaneous-Troubleshooting section.
  C
021		 Clear Service Codes? Press SELECT for longer than 3 beeps to reset trip time counter.
  C
022		 ECU/TCU/CCU Service Code Data display shows first stored service code. See Service Codes in Miscellaneous-Troubleshooting section.
  C
02X		 ECU/TCU/CCU Service Code X Continue to press NEXT button to advance through maximum of 5 stored service codes.

 

OUO1043,0000DB5 -19-21JUN01-9/13

Menu Functions
Menu Description
  C
02Y		 End Continue to press NEXT button until END is displayed on data display. Press NEXT button again to return to "CLEAR FAULT CODES?" display.
  C
03		 CCU Inputs Menu displays ON/OFF status of CCU digital inputs.
  C
031		 Low Coolant Level Data display shows ON/OFF status of low coolant level sensor.
  C
032		 Park Brake Data display shows ON/OFF status of pressure switch controlling park brake light.
  C
033		 Latch Control Data display shows ON/OFF status of park brake lever.
  C
034		 Coldstart Data display shows ON/OFF status of machine coldstart function.
  C
035		 Inter-Axle Lock Dash Switch Data display shows ON/OFF status of inter-axle lock dash switch.
  C
036		 Left Indicator Data display shows ON/OFF status of left turn indicator input from steering column switch.
  C
037		 Right Indicator Data display shows ON/OFF status of right turn indicator input from steering column switch.
  C
038		 Hazards Data display shows ON/OFF status of hazard switch.
  C
039		 Intermittent Wipers Data display shows ON/OFF status of intermittent wiper input from steering column switch.
  C
0310		 Start Signal Data display indicates if key switch is in START position. ON indicates key switch is in START position; OFF indicates key is not in start position.
  C
0311		 Ignition Data display indicates if key switch is in RUN position. ON indicates key switch is in RUN position; OFF indicates key is not in RUN position.
  C
0312		 Brake Data display indicates if brake pedal is being depressed. ON indicates brake pedal is being depressed. OFF indicates brake pedal is not being depressed.
  C
0313		 Gear Hold Data display indicates ON/OFF status of range hold rocker switch.
  C
04		 CCU Analog Inputs Menu displays CCU analog inputs in milivolts for analog sensors as measured at CCU input.
  C
041		 Bin Position Data display shows milivolts of at bin position sensor at CCU input and the associated value of bin position as a percentage of full tip value.
  C
042		 Air Pressure Data display shows milivolts of air pressure sensor as measured at CCU input and the air pressure value in bar or psi.
  C
043		 Hydraulic Temperature Data display shows milivolts of hydraulic temperature sensor as measured at CCU input and temperature value in °C or °F.
  C
044		 Wet Brake Temperature Data display shows milivolts of wet brake temperature sensor as measured at CCU input and temperature value in °C or °F.
  C
045		 Battery Voltage Data display shows both single battery voltage and 2 battery voltage in volts.
  C
046		 Fuel Level Data display shows milivolts of fuel level sensor as measured at CCU input and fuel level value in L or gal.

 

OUO1043,0000DB5 -19-21JUN01-10/13

Menu Functions
Menu Description
  C
05		 CCU Outputs Menu displays CCU analog output signal ON/OFF status.
  C
051		 Intermittent Wipers Data display shows CCU intermittent wiper output signal ON/OFF status.
  C
052		 Left Indicator Data display shows CCU left turn indicator output signal ON/OFF status.
  C
053		 Right Indicator Data display shows CCU right turn indicator output signal ON/OFF status.
  C
054		 Inter-Axle Lock Data display shows CCU inter-axle lock output signal ON/OFF status.
  C
055		 Park Brake Data display shows CCU park brake output signal ON/OFF status.
  C
056		 Overspeed Data display shows CCU overspeed output signal ON/OFF status.
  C
057		 Hydraulic Cutout Data display shows CCU hydraulic cutout output signal ON/OFF status.
  C
058		 Brake Data display shows CCU brake light output signal ON/OFF status, activated with engine brake and transmission retarder.
  C
059		 Bin Float Data display shows CCU bin float output signal ON/OFF status.
  C
0510		 Purging Unit Data display shows CCU purging unit output signal ON/OFF status.
  C
0511		 Engine Running Data display shows CCU engine run output signal ON/OFF status.
D
00		 Machine Configuration Menu displays the current machine settings and allows them to be adjusted, if necessary.
  D
01		 Wiper Intermittent Timing Menu displays current setting of intermittent wipers and allows setting to be changed.
  D
011		 3 Seconds Press NEXT as necessary to advance through screens, until desired intermittent wiper time interval is displayed. When desired interval is displayed, press SELECT for longer than 3 beeps to activate that interval.
  D
012		 4 seconds Press NEXT as necessary to advance through screens, until desired intermittent wiper time interval is displayed. When desired interval is displayed, press SELECT for longer than 3 beeps to activate that interval.
  D
01XX		 XX Seconds Press NEXT as necessary to advance through screens, until desired intermittent wiper time interval is displayed. When desired interval is displayed, press SELECT for longer than 3 beeps to activate that interval.
  D
0120		 20 Seconds Press NEXT as necessary to advance through screens, until desired intermittent wiper time interval is displayed. When desired interval is displayed, press SELECT for longer than 3 beeps to activate that interval.
  D
02		 Tire Size Menu allows tire size to be selected to reflect tire size installed on machine.

NOTE: Value shown in data display is dynamic rolling radius of tire in mm.
  D
021		 647 Press NEXT as necessary to advance through screens, until machine tire size is displayed. When tire size is displayed, press SELECT for longer than 12 beeps to select that interval.

 

OUO1043,0000DB5 -19-21JUN01-11/13

Menu Functions
Menu Description
  D
022		 714 Press NEXT as necessary to advance through screens, until machine tire size is displayed. When tire size is displayed, press SELECT for longer than 12 beeps to select that interval.
  D
023		 734 Press NEXT as necessary to advance through screens, until machine tire size is displayed. When tire size is displayed, press SELECT for longer than 12 beeps to select that interval.
  D
02XX		 XXX Press NEXT as necessary to advance through screens, until machine tire size is displayed. When tire size is displayed, press SELECT for longer than 12 beeps to select that interval.
  D
0217		 YYY Press NEXT as necessary to advance through screens, until machine tire size is displayed. When tire size is displayed, press SELECT for longer than 12 beeps to select that interval.
  D
03		 Imperial/English Units Menu allows operator to determine whether measurements will be displayed in Imperial/English units or metric units.
  D
031		 ON Press SELECT for 3 beeps to display Imperial/English units.
  D
032		 OFF Press SELECT for 3 beeps to display metric units.
  D
04		 Bin Tip Angle Menu allows operator to set bin full down and bin full up positions. Also allows operator to determine bin tip counter parameters.
  D
041		 Set Zero With machine body in the full down position, press SELECT for longer than 3 beeps to set the zero position. Display will change to show 0%.
  D
042		 Set Full Tip With machine body in the full up position, press SELECT for longer than 3 beeps to set the zero position. Display will change to show 100%.
  D
043		 Set Low Bin Counter Trigger Before setting low bin count trigger, set zero and full tip values.
Low bin counter trigger default is body raised 10%.
To set low bin counter trigger, raise body to desired low bin counter trigger height. Data display will show current bin height percentage. Press SELECT for 12 beeps to set low bin counter trigger.
  D
04		 Set High Bin Counter Trigger Before setting high bin count trigger, set zero and full tip values.
High bin counter trigger default is body raised 70%.
To set high bin counter trigger, raise body to desired high bin counter trigger height. Data display will show current bin height percentage. Press SELECT for 12 beeps to set high bin counter trigger.
E
00		 Machine Identification Menu displays machine identification information.
  E
01		 ECU Menu displays engine control unit (ECU) identification information.
  E
011		 EN XXXXXX Message display shows ECU part number.
  E
012		 Software Version Data display shows current ECU software version.
  E
013		 Hardware Version Data display shows current ECU hardware version.
  E
014		 Serial Number Message display shows ECU serial number.

 

OUO1043,0000DB5 -19-21JUN01-12/13

Menu Functions
Menu Description
  E
015		 Engine Hours Data display shows engine hours logged on current ECU.
  E
02		 TCU Menu displays transmission control unit (TCU) identification information.
  E
021		 TN XXXXXX Message display shows TCU part number.
  E
022		 Software Version Data display shows current TCU software version.
  E
023		 Hardware Version Data display shows current TCU hardware version.
  E
024		 Serial Number Message display shows TCU serial number.
  E
03		 MDU Menu displays monitor display unit (MDU) identification information.
  E
031		 VIN AEB XXXXX Message display shows the vehicle identification number of the machine.
  E
032		 Software Version Data display shows current MDU software version information.
  E
033		 Hardware Version Data display shows current MDU hardware version.
  E
034		 Serial Number Data display shows MDU serial number.
  E
035		 Engine Hours Data display shows MDU hours on current MDU.
  E
04		 CCU Menu displays chassis control unit (CCU) identification information.
  E
041		 VIN AEB XXXXXX Message display shows the vehicle identification number of the machine.
  E
042		 Software Version Data display shows current CCU software version information.
  E
043		 Hardware Version Data display shows current CCU hardware version.
  E
044		 Serial Number Message display shows CCU serial number.
  E
045		 Engine Hours Data display shows CCU hours on current CCU.

 

OUO1043,0000DB5 -19-21JUN01-13/13