Mechanically Releasing Park Brake

causym CAUTION: Machine will roll freely when park brake is released. To prevent injury, chock wheels before releasing park brake.

1. Chock tires to prevent machine rollaway.

2. Remove release stud (1), nut (2) and washer (3) from storage position (4).

3. Install release stud in hole at rear of park brake actuator housing and rotate clockwise a 1/4 turn to lock into place.

4. Install washer and nut onto release stud and tighten until park brake releases.

T147643B


1-Release Stud
2-Nut
3-Washer
4-Release Stud Storage Location

OUO1043,0000DFC -19-30OCT01-1/1