Miscellaneous Equipment

High beam and low beam headlights (1) are controlled using the steering column lever. (See Steering Column Lever in this section.)

Tail, brake and park lights (4) light when brake pedal is depressed or when accelerator pedal is released and torque retarder and exhaust brake are activated.

Turn indicator lights (2 and 3) light when warning lights or turn signals are turned ON.

Back-up lights (5) light when machine transmission is shifted to reverse.

1-Headlight and Front Park Light (2 used)
2-Front Turn Indicator Light (2 used)
3-Rear Turn Indicator Light (2 used)
4-Tail, Brake and Park Light (2 used)
5-Back Up Light (3 used)

OUO1043,0000E3E -19-01NOV01-1/6

If necessary, use the secondary exit tool (1) to break the glass of the right-side window.

1-Secondary Exit Tool

OUO1043,0000E3E -19-01NOV01-2/6

The 12-volt accessory outlet is used to power operator accessories, as necessary.

1-12-Volt Accessory Outlet

OUO1043,0000E3E -19-01NOV01-3/6

Store items in compartment located behind the operator's seat to keep them clean and dry.

1-Storage Compartment

OUO1043,0000E3E -19-01NOV01-4/6

NOTE: Brace is also used as cab tilt pump handle.

The wheel wrench (1) and brace (2) are located at rear of cab, behind the operator's seat and are secured in position by 2 plates.

1-Wheel Wrench
2-Brace

OUO1043,0000E3E -19-01NOV01-5/6

The windshield washer reservoir (1) is located at front of cab under hood.

To fill reservoir:

2. Remove filler cap (2) and fill reservoir with washer cleaning fluid.

3. Install cap. Ensure that electrical connection and fluid delivery hose are also secure.

4. Close hood.

1-Windshield Washer Reservoir
2-Filler Cap

OUO1043,0000E3E -19-01NOV01-6/6