Install Dump Body Prop

T143166B-UN-21JUN01

1 - Dump Body Prop

2 - Stop

3 - Stop Bolt

4 - Handle

5 - Retaining Cup

1. CAUTION: When the dump body is raised to perform maintenance tasks, the dump body prop must be installed.

   NOTE: Operate the dump body control lever in the operator's station to raise and lower the dump body.

   Raise dump body high enough to allow dump body prop (1) to be fully raised.

2. Use handle (4) to raise dump body prop. Ensure that stop bolt (3) is in firm contact with stop (2).

3. CAUTION: Check to ensure that the dump body prop is seated securely in retaining cup.

   Lower dump body until dump body prop is seated securely in retaining cup (5).

4. Relieve hydraulic pressure before servicing machine.