Park And Prepare For Service Safely

Warn others of service work. Always park and prepare your machine for service or repair properly.

• Park machine on a level surface.
• Lower dump body unless raised position is required for service.
• Engage park brake.
• Stop engine and remove key.
• Attach a "Do Not Operate" tag in an obvious place in the operator's station.
• Install the articulation safety locking bar.
• Install service locks if dump body or cab are raised for service.

Securely support machine before working under it.

Install wheel chocks to ensure machine cannot move backward or forward during service.

Understand service procedures before beginning repairs. Keep service area clean and dry. Use two people whenever the engine must be running for service work.

TX14740,0001D36 -19-22JUN01-1/1