|
1-Air Conditioner and Heater Blower Motor Switch:
Turn switch clockwise to increase blower speed. Turn counterclockwise to decrease blower speed.
2-Air Conditioner Switch:
Push upper half of switch to turn on air conditioner. Push lower half of switch to turn off air conditioner.
3-Auxiliary Hydraulic Override Switch:
Allows auxiliary hydraulics to operate after operator exits machine. This switch has two positions:
-
Push upper half of switch to momentary position to activate bypass mode. Switch will return to lower position when released.
4-Quik-Tatch Switch:
Press and hold upper half of switch to engage lock pins. Press and hold lower half of switch to retract lock pins.
NOTE:
The switch will automatically return to center position when released. The mounting plates will stop at the position they are in at the time the switch is released.
5-Windshield Wiper/Washer Switch:
This switch has three positions:
-
Push upper half of switch to momentary position to release windshield washer fluid. Switch will return to "On" position when released.
-
Push to middle position to turn wiper on.
-
Push lower half of switch to turn wiper off.
6-Dual Flasher Switch:
Push upper half of switch to turn warning lights on. Push lower half of switch to turn warning lights off.
7-High Flow Switch:
Used for attachments that require a high hydraulic flow rate to operate. This switch has three positions:
|
-
Push upper half of switch to momentary "On" position, and release to activate high flow option. Switch will return to center "Run" position.
-
Middle position is the "Run" position.
-
Push lower half of switch to deactivate high flow option.
8-Work Lights Switch:
This switch has three positions:
-
Push upper half of switch to turn on front work lights, red tail lights, and rear work light.
-
Push to middle position to turn on front work lights and red tail lights.
-
Push lower half of switch to turn lights off.
9-MENU Button:
Press button to scroll through menu on the engagement and monitor unit.
10-Park Brake Switch:
This switch has three positions:
11-Key Switch:
This switch has three positions:
-
Position where ignition key can be inserted or removed is the "off" position. No circuits are active in this position.
-
Turn key
clockwise
from the "off" position. This is the "run" position for the engine.
|