| Model: 317 and 320 Skid Steer |
PIN/Serial Number: |
| Hour Meter Reading: |
| |
| SERVICE INTERVALS |
| Service machine at intervals shown on this chart. Also, perform service on items at multiples of the original requirement. For example, at 500 hours also service those items (if applicable) listed under 250 hours, 50 hours, and 10 hours or daily. |
| FLUID SAMPLING |
| Fluid samples should be taken from each system at its recommended change interval prior to actually draining the fluid. Regular oil sampling will extend the operational life of your machine. |
| |
| As Required |
| [ ] Add coolant extender as indicated by COOL-GARD™ II test strips |
| |
| Every 10 Hours or Daily |
| [ ] Check engine oil level |
[ ] Check radiator coolant level |
| [ ] Check hydraulic tank oil level |
[ ] Drain fuel water separator filter |
| [ ] Clean radiator and oil cooler |
[ ] Check or drain auxiliary water separator fuel filter-if equipped |
| |
| Every 50 Hours |
| [ ] Lubricate boom linkage and cylinder pivot points |
[ ] Check tire pressure |
| |
| Every 250 Hours |
| [ ] Check wheel lug nut torque |
[ ] Change engine oil and replace filter |
| [ ] Take engine oil sample |
| |
| Every 500 Hours |
| [ ] Replace in-line fuel filter |
[ ] Replace auxiliary water separator fuel filter-if equipped |
| [ ] Replace fuel water separator filter |
[ ] Lubricate steering linkage |
| [ ] Replace primary air cleaner element |
[ ] Lubricate foot pedals |
| [ ] Replace hydraulic oil tank breather element |
[ ] Take hydraulic/hydrostatic oil sample |
| [ ] Replace hydraulic oil filter |
[ ] Take diesel fuel sample |
| [ ] Check chain case oil level |
[ ] Take engine coolant sample |
| |
| Every 1000 Hours |
| [ ] Replace secondary air cleaner element |
[ ] Drain and refill hydraulic/hydrostatic tank oil |
| [ ] Drain and refill chain case oil |
[ ] Check coolant |
| |