|
The diagnostic trouble codes can only be viewed from the engagement and monitor unit. The engagement and monitor unit displays both engine and machine diagnostic trouble codes. To access the diagnostic trouble codes:
1.
Press "MENU" on the engagement and monitor unit until "CODES" appears in the engagement and monitor unit display.
2.
Press "SELECT" to enter the "CODES" menu.
3.
Pressing "SELECT" again will scroll through the diagnostic trouble codes if any are present in the machine.
|
4.
If no diagnostic trouble codes are present, or when the end of the diagnostic trouble code list is reached, "END" will appear in the engagement and monitor unit display.
5.
Press "SELECT" again, and "WAIT" will display on the engagement and monitor unit.
6.
When "WAIT" is displayed, press "SELECT" to scroll back through the diagnostic trouble code list, or hold "SELECT" for 5 seconds to clear the stored diagnostic trouble codes. After the diagnostic trouble codes are cleared, "END" will appear on the engagement and monitor unit display.
|