Using Booster Batteries-12-Volt SystemBefore boost starting, machine must be properly shut down to prevent unexpected machine movement when engine starts.
IMPORTANT: The machine electrical system is a 12-volt negative (-) ground. Use only 12-volt booster batteries. 1. Connect one end of the positive cable to the positive terminal of the machine batteries and the other end to the positive terminal of the booster batteries.2. Connect one end of the negative cable to the negative terminal of the booster batteries. Connect other end of the negative cable to the machine as far away from the machine batteries as possible. 3. Start engine. 4. Immediately after starting engine disconnect end of the negative cable from the machine. Then disconnect the other end of the negative cable from the negative terminal of the booster batteries. 5. Disconnect positive cable from booster batteries and machine batteries. |
|
CAUTION:
Prevent possible injury from exploding battery. An explosive gas is produced while batteries are in use or being charged. Keep flames or sparks away from the battery area. Make sure the batteries are charged in a well ventilated area.
OUT4001,00000E1 -19-02JUL09-1/1 |