Operating Auxiliary Hydraulics-Hands Only Machines
Unlocking right pedal (auxiliary hydraulics control):
-
Push lockout handle (1) forward and rest in notch (2) labeled "Unlocked."
Locking right pedal in neutral position:
-
Move lockout handle out of "Unlocked" position and pull rearward.
Activating auxiliary hydraulics:
-
Push the front of the right pedal (3) down to supply oil to male quick coupler (5).
-
Pushing front of right pedal down into detent will put control valve into detent position to give continuous flow to an attachment. The pedal will stay in this position until operator releases pedal.
-
Push back of right pedal to supply oil to female quick coupler (4) reversing oil flow.
IMPORTANT:
The auxiliary pedal lockout must be locked in neutral when auxiliary hydraulics are not in use to prevent overheating of hydraulic oil.
NOTE:
If pedal has not been locked into detent position, it will automatically return to center position when operator releases pressure to pedal.
|
1-Auxiliary Pedal Lockout Handle
2-"Unlocked" Notch
3-Right Pedal
4-Female Quick Coupler
5-Male Quick Coupler
|
