Lubricate Boom Linkage, Cylinder Pivots, and Quik-Tatch™

NOTE: In severe operating conditions, Quik-Tatch ™ linkage/pivot points (3) may need more frequent lubrication.

Lubricate pivot points (1), cylinders (2), and Quik-Tatch ™ linkage/pivot points (3) on each side of boom every 50 hours with one or two shots of John Deere grease.

1-Pivot Points
2-Cylinders
3-Quik-Tatch™ Linkage/Pivot Points

Quik-Tatch is a trademark of Deere & Company

TX14740,00000AA -19-06FEB08-1/1