Change Chain Case Oil

2. Position a suitable container underneath drain plugs (1) located on bottom rear of each side of machine.

3. Remove drain plug(s).

4. Allow oil to drain into container. Dispose of waste oil properly.

5. Install plugs.

6. Remove fill plugs (2) located on each side of the machine frame.

7. Fill each chain case until oil level is at 12.7 mm (0.5 in.) below fill plug threads. See Maintenance-Machine. (Section 3-1.)

Specification

8. Install plugs.

1-Drain Plug
2-Fill Plug

TX14740,00000BF -19-14MAR07-1/1