Flush Cooling System

IMPORTANT: To prevent engine damage:

  • Do not pour water into a hot engine.

  • Do not operate engine without coolant.

1. Fill cooling system with clean water and John Deere Cooling System Cleaner, John Deere Cooling System Quick Flush. Follow directions on the can.

2. Install and tighten radiator cap.

3. Start engine, and run engine until it reaches operating temperature.

causym CAUTION: Engine and coolant will be hot. Avoid contact with skin to prevent serious burns.

4. Stop engine.

5. Drain cooling system immediately before rust and dirt settle.

6. Remove recovery tank (1) and overflow hose.

7. Clean tank.

8. Install tank and overflow hose.

9. Fill cooling system slowly.

T199047A


1-Recovery Tank

TX14740,00000C1 -19-21OCT09-1/1