Replacing Fuses

1. Locate fuse panel cover (1) in operator's station on right side.

2. Remove fuse panel cover.

3. Pull fuse out of socket.

4. Check metal clip in fuse window. Discard fuse if clip is broken.

5. Push new fuse into proper socket. Be sure new fuse is the same amperage as removed fuse.


1-Fuse Panel Cover

T154193B

TX14740,00000C9 -19-29JUN05-1/2


1-F1-Key Switch and Accessory 15 Amp Fuse
2-F2-Monitor 15 Amp Fuse
3-F3-Accessory 25 Amp Fuse
4-F4-Lights 20 Amp Fuse

T198240

TX14740,00000C9 -19-29JUN05-2/2