Cleaning and Replacing Air Conditioner and Heater/Defroster Air Filters (If Equipped)

NOTE: Check pre cleaning foam (2) and air filter element (3) periodically, especially if running in dirty applications.

1. Park machine.

2. Remove cap screws, and remove shield (1).

3. Remove pre cleaning foam and air filter element.

4. The filter element can be blown off with a low pressure air gun and reused or replaced.

5. Reuse or replace pre cleaning foam and filter element.

6. Install the element with the rubber seal toward the heater core.

7. Install shield and cap screws.

1-Shield
2-Pre Cleaning Foam
3-Air Filter Element

TX14740,0000133 -19-14MAR07-1/1