Replace Secondary Air Cleaner Element

IMPORTANT: Prevent possible machine damage. Do not clean secondary element. Replace it when engine air filter restriction indicator light is lit on the instrument panel and primary element has already been replaced. Do not remove secondary element unless it is being replaced.

Do not start engine without both the primary and secondary filter elements installed.

2. Open rear service door and engine cover, and remove left side panel.

3. Unhook three end cap latches, and remove end cap.

4. Remove primary element (1).

5. Remove secondary element (2). Discard element.

6. Install new secondary element.

7. Install primary element.

8. Install end cap, and secure latches.

9. Start engine, and check air restriction light on instrument panel to be sure there is no restriction.

• If restriction indicator light is still on, see your authorized dealer.

10. Install left side panel, and close engine cover and rear service door.

1-Primary Element
2-Secondary Element

VD76477,000008A -19-14MAR07-1/1