Entering Skid Steer

CAUTION: Prevent possible injury when entering and exiting machine. Always maintain a three-point contact. Do not use controls as handholds.

Entering the machine from the side or the front without a bucket attached: Use the boom step (1) and handholds (2) and (3).

Entering the machine from the front with a bucket attached: Use step (4) on back of bucket and handholds (2) and (3).

Entering the machine when the boom is raised on the boom lock:

1. Enter from the front.
2. Use handholds (3).
3. Step over the toe guard (5).

Exiting the machine:

CAUTION: Avoid possible injury from unexpected boom movement. Always lower boom to the ground or onto boom lock. Always engage the park brake, and stop the engine before exiting the machine.

1. Engage park brake.
2. Use the handholds for support. Step onto the boom step or bucket step and then onto the ground.

1-Boom Step
2-Boom Handholds
3-Operator's Station Handholds
4-Bucket Step
5-Toe Guard

VD76477,000009A -19-20MAR07-1/1