Replace Primary Air Cleaner Element

IMPORTANT: Prevent possible engine damage. Do not clean primary air cleaner element. Replace it when air restriction light is illuminated on instrument panel. To prevent dirt from being sucked into engine, do not remove element when engine is running.

Do not start engine without both the primary and secondary filter elements installed.

2. Open rear service door and engine cover, and remove left side panel.

3. Unhook end cap latches (1), and remove end cap.

4. Remove and discard primary element (2).

5. Clean any loose dirt from canister, and inspect end of canister for dirt that may prevent new element from sealing properly.

6. Install new primary element.

7. Install cover, and secure latches.

8. Start engine and check air restriction indicator to be sure there is no restriction.

• If air restriction indicator still shows restriction, replace secondary element.

9. Install left side panel, and close engine cover and rear service door.

1-End Cap Latch
2-Primary Element

VD76477,00000A0 -19-21MAR07-1/1