Operating Boom-EH Controls

The right EH control lever controls boom function.

To actuate boom:

• move lever rearward to raise boom.
• move lever forward to lower boom.

Boom will move faster the further the control is moved.

If not in float position, control will return to neutral-hold position when released.

Float Function:

Hydraulic pressure is relieved on boom cylinder and allows boom and attachment to follow contour of the ground.

To actuate float:

• push and hold trigger (6) and push forward on control. Once in float position, control can be released and allowed to return to neutral.

To de-activate float:

• move control forward or rearward.

6-Auxiliary 1
7-Float
8-Auxiliary 2 A
9-Auxiliary 2 B

ER93822,0000083 -19-29JAN08-1/1