Stopping the Engine-EH Controls

1. Move steering lever to neutral position to stop machine.

2. Disengage auxiliary hydraulics by returning handle to neutral position.

3. Put engine speed to low idle by:

a. pulling engine speed control lever back to low idle.

b. releasing pressure on foot throttle to low idle.

causym CAUTION: Prevent possible injury from unexpected boom movement. Never exit

machine with boom arms raised unless boom is resting on boom lock.

4. Lower boom completely to ground. If boom is to remain in raised position, use boom lock.

5. Engage park brake.

6. Turn key switch to OFF position.

7. Release seat belt.

ER93822,00000AB -19-06FEB08-1/1