|
Conditions in certain geographical areas may require lubricant recommendations different from those printed in this manual. Some John Deere brand coolants and lubricants may not be available in your location.
Synthetic lubricants may be used if they meet the performance requirements as shown in this manual.
The temperature limits and service intervals shown in this manual apply to both conventional and synthetic oils.
Re-refined base stock products may be used if the finished lubricant meets the performance requirements.
Your machine was shipped from the factory with engine oil in the hydraulic system. Engine oil has been
|
tested to be compatible with high quality anti wear hydraulic oils (AWHO). There is no risk to the hydraulic system of using a high quality AWHO meeting the system oil specifications to top off the system, or for future oil changes.
However, as a general guideline if the engine oil is replaced with a high quality AWHO, avoid mixing different brands or types of oil. Oil manufacturers blend base stock additives to create their oils and to meet certain specifications and performance requirements. Mixing different oils can interfere with the proper functioning of these formulations and degrade lubricant performance.
Consult your authorized dealer to obtain specific information and recommendations
|