Install Proper Ballast (1550, 1570, 1575, 1580, 1585)

CAUTION: Avoid injury! Machine can become unstable when operating with attachment. Ballast is required when the attachment is installed.

When the attachment is removed, also remove any ballast that was added to the machine.

Use only attachments and accessories recommended by the manufacturer.

When attaching mower decks to the front mower, add the following weight to improve the handling and stability of the front mower:

	60 in. SD	62 in. RD	72 in. SD
No Cab	Standard wheel track width with (1) Rear Weight*	Standard wheel track width with (1) Rear Weight*	Standard wheel track width with (2) Rear Weights*
Cab	Standard wheel track width with (4) Rear Weights*	Standard wheel track width with (1) LH and RH Wheel Weight and (3) Rear Weights* Or Wide wheel track width with (3) Rear Weights*	Wide wheel track width with No Wheel Weights and (5) Rear Weights*
*19 kg (42 lb.) Rear Suitcase Weight

To install rear weights:

1. 
   TCAL46533-UN-12APR13

   Remove spring pin (A).

---




2. Pull rod (B) out of weight bracket.

3. Add John Deere 19 Kg (42 lb.) suitcase weights to the weight bracket, as specified.

4. Install rod (B) and secure with spring pin (A).