Grinding the Bed Knife

NOTE: Bed knife and support assembly must be ground as a complete unit.

1. 
   TCAL41674-UN-22JAN13

   When grinding the bed knife, it is important that the relief angles on the top surface (A) and on the front surface (B) meet specifications.

   Item	Measurement	Specification
   Bed Knife Relief Angle (Top Surface)	Angle	6.5°

   Item	Measurement	Specification
   Bed Knife Relief Angle (Front Surface)	Angle	15°

---




2. Put entire bed knife support and bed knife in a suitable grinder and grind until material is consistently removed from the entire length of the top and front surfaces of the bed knife.