Converting From HY-GARD to BIO HY-GARD

Systems being converted from HY-GARD to BIO HY-GARD should follow the procedure listed below to obtain maximum lubricant biodegradability.

1. Park machine on a level surface.

2. Stop engine and set park brake.

3. Drain gearcase.

4. Fill gearcase with BIO HY-GARD to appropriate level.

5. Start engine and bring to medium idle.

6. Cycle cutting reel several times.

7. Stop engine and check hydraulic oil level. Add BIO HY-GARD to appropriate level.

8. Operate machine under normal operating conditions for a minimum of two hours.

9. Repeat steps 1-7.

10. Follow recommended service intervals.