Using the Lift Cylinder Safety Support

To service vehicle, always use the lift cylinder safety support.

CAUTION: Avoid injury! Attachment is heavy and can crush.

• Support any raised attachment with a mechanical lock or other safe method before servicing.

• Empty all material from any attachment before servicing.

Installing:

1. Empty attachment.

2. Fully raise attachment to service position.

3. Park vehicle safely. (See Parking Safely in the Safety section.)

4. 
   TCAL44993-UN-14MAY13

   Remove safety support (A) using handle (B) from stored position in the rear of the vehicle on the left side.

---




5. 
   TCAL44994-UN-14MAY13

   Install safety support onto the lift cylinder rod (B). Be sure that the lift cylinder rod is seated properly between the safety support rubber grommets (C).

---

Removing:

1. Remove safety support from the lift cylinder rod.

2. Return safety support to the stored position.

3. Lower attachment.