Using Seat Belts

CAUTION: Avoid injury! Always wear a seat belt when operating machine with a Roll-Over Protective Structure (ROPS) or a cab. Do not jump from machine if machine tips.

To Connect the Seat Belt:

TCAL44997-UN-14MAY13

• With one continuous motion, pull seat belt from retractor (A) and across hips and waist.

NOTE: If seat belt stops short of being able to insert into latch, allow belt to return into the retractor and pull again.

• Insert buckle into latch (B) on other side of seat. When properly inserted into the latch, the buckle clicks.

To Disconnect the Seat Belt:

• Press red button (C). Allow seat belt to return to retractor.