Using the Hydraulic PTO Control Lever

Perform this operational procedure with vehicles equipped with the auxiliary hydraulic kit. Engaging the hydraulic PTO lever provides auxiliary hydraulics for attachments requiring the capability.

Dash indicator illuminates when PTO is engaged.

IMPORTANT: Avoid damage! Do not operate PTO control lever without an auxiliary attachment connected. Hydraulic flow is blocked and pressure bypasses through relief port of hydraulic control valve causing excessive heat buildup and possible component failure.

Check the auxiliary hydraulic oil level before each use.

To Engage the Hydraulic PTO:

• Pull up hydraulic PTO lever to the on position.

To Disengage the Hydraulic PTO:

• Push Hydraulic PTO lever down to the off position.