Raising and Lowering the Cargo Box

CAUTION: Avoid injury! Make sure that the vehicle is on a hard, level surface and the park brake is locked before raising the cargo box. If the vehicle is facing uphill with the cargo box raised, the weight of the cargo box can cause the vehicle to tip.

• Do not perform a service function under a raised attachment without the lift cylinder safety support properly installed.

• Empty all material from the cargo box before servicing the vehicle.

1. Start engine.

2. Pull and hold back lift cylinder lever to raise cargo box.

3. NOTE: The lift cylinder retracts and the cargo box lowers with the engine running or the engine stopped.

   Pushing the lever down beyond the lower position into the detented float position causes the box to drop more slowly than in the lower position. The circuit is restricted to avoid a sudden drop.

   Push and hold down lever to lower cargo box.

4. Stop engine.